• 13 pc Drill Index
  • Action Camera Grip
    • Action Camera Grip

    • Action Camera Grip

    • $20.00
    • Hand grip is very useful when recording action events from the sidelines Helps steady the shot or allow smooth panning while following the action Ergonomic handle provides natural “aiming” Works with any action camera with a flat base 6061-T6 aluminum
    • Add to cart
  • Aero Finish Washer
    • Aero Finish Washer

    • Aero Finish Washer

    • $4.50
    • 6061-T6 aluminum. Countersunk hole allows a smooth, aerodynamic finish. Available for #10 or 1/4″ flat head bolts.
    • Select options This product has multiple variants. The options may be chosen on the product page
  • Battery Cover-RF98+
    • Battery Cover-RF98+

    • Battery Cover-RF98+

    • $150.00
    • Lightweight carbon fiber battery cover replaces the original flimsy fiberglass cover Specs: Lightweight vacuum bagged carbon fiber Available to fit Van Diemen RF98 and newer cars Weighs less than the stock fiberglass cover and is more rigid
    • Add to cart
  • Bias Bar and Master Cylinder Upgrade Kit
    • Bias Bar and Master Cylinder Upgrade Kit

    • Bias Bar and Master Cylinder Upgrade Kit

    • $189.00 – $475.00
    • Upgrade your late model (RF98 and newer) Van Diemen to the Tilton 77-series rear pivoting master cylinders. The Tilton 77-series master cylinders pivot on a spherical bearing and feature a one-piece pushrod and piston, eliminating side thrust in the bore and reducing brake hysteresis. All this makes for more consistent, repeatable, and predictable braking. Allows use of the Tilton 900-series…
    • Select options This product has multiple variants. The options may be chosen on the product page
  • Camber Adjuster Kit
    • Camber Adjuster Kit

    • Camber Adjuster Kit

    • $525.00
    • Update your Van Diemen RF90 through RF96 to late model Van Diemen specs Shim adjustment allows front camber changes without changing toe settings Uses standard Van Diemen RF95 rear camber shims Make quick camber adjustments on pit lane- get more out of test and practice sessions CNC machined 6061-T6 aluminum All hardware included (shims not included) Quick, simple bolt-on installation…
    • Add to cart
  • Carb Cover-Weber 32/36
    • Carb Cover-Weber 32/36

    • Carb Cover-Weber 32/36

    • $7.00
    • Prevent debris from getting in your carb when the filter or engine cover is removed 3D printed from durable PLA+ plastic Hi-vis orange to prevent forgetting it when it's time to hit the track (other colors available)
    • Add to cart
  • Cartek FIA Rain Light
    • Cartek FIA Rain Light

    • Cartek FIA Rain Light

    • $139.95
    • Homologated to the latest FIA 8874-2019 regulations these rain lights are listed on FIA Technical List #76 and are compliant with the SCCA GCR in 2024.  These can be used in static or flashing 4Hz mode. The new generation of Cartek rain light is 3 times brighter than previous Cartek rain lights and come with a 190mm mil-spec cable (Type55…
    • Select options This product has multiple variants. The options may be chosen on the product page
  • Diffuser
    • Diffuser

    • Diffuser

    • $975.00
    • Lighter than factory Van Diemen diffuser More efficient design – better airflow Maximum width allowed-more surface area Full vacuum-bagged construction Nomex honeycomb core in heat-sensitive areas Options to fit many models including: Van Diemen – RF97 thru RF02 Van Diemen – RF96 and older Reynard S2000 NOTE: Diffusers are custom made to order Contact us to discuss a custom diffuser…
    • Add to cart
  • Fire Bottle Cover
    • Fire Bottle Cover

    • Fire Bottle Cover

    • $100.00
    • Lightweight carbon fiber fire bottle cover replaces the original sheet metal cover Specs: Lightweight vacuum bagged carbon fiber Available to fit Van Diemen RF90-95 or RF98 and newer cars with the small diameter fire bottle Weighs less than half the stock sheet metal cover
    • Select options This product has multiple variants. The options may be chosen on the product page
  • Folding Indy-style Jack
    • Folding Indy-style Jack

    • Folding Indy-style Jack

    • $255.00
    • All steel construction. Ergonomic handle design- no need to bend over. Effortless lifting of car. Won’t interfere with lower wing element. Attaches to existing wing mounts. 1000 lb capacity wheels (each)- not cheap lawnmower wheels. Great for racers with open or small enclosed trailers. Pivoting center post allows side movement-great for maneuvering in a tight garage or paddock space. Post…
    • Add to cart
  • Gyrodynamics Bottle Opener
  • Hoodie
    • Hoodie

    • Hoodie

    • $50.00
    • High quality pullover hoodie Preshrunk fleece knit 8 oz. Heavy Blend, 50% cotton/50% polyester with silk-screened logo Available in size large  
    • Add to cart
  • Jack Lug-LD200
    • Jack Lug-LD200

    • Jack Lug-LD200

    • $20.00
    • Bolts to lower holes on LD200 rear cover, allowing use of our Indy-style Jack Can be used on FF or FC Long enough to reach under most standard diffusers (with slots cut in diffuser) 6061-T6 aluminum. Sold in pairs
    • Add to cart
  • Oil Cooler Adapter – Yamaha R1/R6
    • Oil Cooler Adapter – Yamaha R1/R6

    • Oil Cooler Adapter – Yamaha R1/R6

    • $245.00
    • Replaces the OEM oil-to-water cooler, allowing installation of external oil cooler Center stud has 3/8″ female NPT fitting, allowing many different fitting sizes to be used Adapter cap has single 3/8″ female NPT hole, also allowing different fitting sizes Cap is designed to allow tapping of additional holes for pressure or temperature sensors Cap is 6061-T6 Aluminum, center stud is…
    • Add to cart
  • Penske Remote Canister Bracket
    • Penske Remote Canister Bracket

    • Penske Remote Canister Bracket

    • $49.00
    • Ditch the hose clamps or tube clips and mount your Penske 8100 remote canister to chassis tubes the right way. Easy installation Firmly mounted, will not move Fits standard Penske 8100 remote canister, may fit other canisters 6061-T6 Billet aluminum Hardware included  
    • Select options This product has multiple variants. The options may be chosen on the product page
  • Penske Shock Inflation Tool
    • Penske Shock Inflation Tool

    • Penske Shock Inflation Tool

    • $95.00
    • Attachment valve prevents pressure loss when installing and removing tool Schrader valve allows quick and easy pressure adjustments 300 psi maximum pressure  
    • Add to cart
  • Penske Shock Piggyback Clamp
    • Penske Shock Piggyback Clamp

    • Penske Shock Piggyback Clamp

    • $40.00
    • 6061-T6 aluminum. Convert your Penske 8100, 8300, and 8700 shocks to a piggy-back style. Allows you to shorten the hose. Simplify and neaten remote reservoir mounting. Includes hardware.
    • Add to cart
  • Rain Light Bracket
    • Rain Light Bracket

    • Rain Light Bracket

    • $15.00
    • Designed to be mounted between typical FC wing mount plates with a distance of 3.25" Lightweight aluminum Hole patterns to fit the following rain lights: Cartek FIA 2019 Rectangular Cartek FIA 2019 Round Lifeline FIA 2019 Rectangular*   *May require an additional hole to be drilled for the wiring pigtail Get your FIA 2019 rain lights here:  Cartek Rain Light
    • Add to cart
  • Rear Wing End-plates
    • Rear Wing End-plates

    • Rear Wing End-plates

    • $120.00 – $200.00
    • Fiberglass composite construction.  Carbon fiber also available Direct replacement for factory Van Diemen endplates. Models for all years of Van Diemen, special applications upon request. Constructed in gloss black (also paintable). Custom shapes and sizes are available. NOTE: wing end plates are custom made to order
    • Select options This product has multiple variants. The options may be chosen on the product page
  • RF94-96 Inner Duct
    • RF94-96 Inner Duct

    • RF94-96 Inner Duct

    • $225.00
    • Inner radiator duct fits RF94-96 and older cars that have been updated to the RF94+ side pods Fiberglass and epoxy construction, vacuum bagged for higher strength and lighter weight
    • Select options This product has multiple variants. The options may be chosen on the product page
  • RF95 Camber Shims
    • RF95 Camber Shims

    • RF95 Camber Shims

    • $3.00 – $4.00
    • Standard Van Diemen RF95 rear camber shims Also used with the Gyrodynamics front camber adjustment kit: https://demo.gyrodynamics.net/product/camber-adjuster-kit Laser-cut 6061-T6 aluminum
    • Select options This product has multiple variants. The options may be chosen on the product page
  • RF98+ Rear Camber Shim
    • RF98+ Rear Camber Shim

    • RF98+ Rear Camber Shim

    • $3.00 – $5.00
    • Rear camber shims for Van Diemen RF98 and newer Made of either 304 series stainless steel or 6061-T6 aluminum Includes a hole for safety wire and to assist in removal Four thicknesses available: .028" (stainless steel) .058" (stainless steel) .125" (6061 aluminum) .250" (6061 aluminum)  
    • Select options This product has multiple variants. The options may be chosen on the product page
  • Sport Cap
    • Sport Cap

    • Sport Cap

    • $15.00
    • Structured mid profile solid back Plastic snap-back closure 80/20 acrylic/wool
    • Add to cart